अन्य संबंधित एसी इलेक्ट्रॉनिक लोड

1. डिज़ाइन उद्देश्य:
2. मुख्य प्रदर्शन संकेतक:
2.1 Maximum dissipated power:
2.2 Maximum output current:.
2.3 .
2.4 Operating mode: constant voltage (voltage stability ± 5 percent ), current (current stability ± 5 percent ), constant resistance (resistance stability ± 5 percent ).
2.5 Protection function: overcurrent protection, overload protection
2.6 Display voltage and current accuracy: voltage display is displayed in 3 digits, with a maximum display of 99.9 V and a fixed decimal point.
4-digit ammeter with a maximum display of 10.00A and a fixed decimal point.
2.7 Status indicator: current working status indication (constant voltage, constant current, constant resistance).
2.8 Key input controls input voltage and current signals.
3. Software reservation function: Upgrading the software without changing the hardware can achieve the following functions
3.1 Predetermined (current, voltage, resistance) values. To discharge the battery at a constant current of 3A, first input the 3A current into the electronic load, and then connect the power supply. The electronic load will discharge the battery at a constant current of 3A.
3.2 When multiple electronic loads work together, only one display panel can be used. When dozens or hundreds of electronic loads form a group of test systems, using this method can greatly reduce costs.
3.3 Synchronization function (When multiple loads work together and all operating parameters are required to be the same, the synchronization function can be used, which eliminates the need for each machine to set parameters.
3.4 Parameter saving function: When an electronic load is used in a production line, a set of data can be set for the product and saved. When the product is next produced, it is only necessary to call it up and use it, without having to redesign the parameters.
3.5 Curve parameter setting: Many times, it is necessary to make voltage changes under different current conditions or current changes under different voltages for chargers or power supplies. This function allows the device to automatically control input signals according to specified parameters during testing.
3.6 Data storage function: For small amounts of data, it can be directly stored on a single chip computer. For large amounts of data, it will be transferred to a massive computer hard disk through a serial port.
3.7 बड़ी क्षमता समानांतर ऑपरेशन.